SST-1 Stainless Steel Tubing 1mm o.d. .6mm i.d. for shroud hooks


Sold Out

Product Description

SST-1 - Stainless Steel Tubing - Very Small 1mm Outside Diameter with 0.6mm Inside Diameter. For making shroud hooks by threading with 0.55 Rigging Wire (W055 or MW09) and bending into hook, to create removable shrouds or jackstays.
Comes in 160mm length - enough to make about 6 hooks

Hint - Due to the fine tolerance - grind a point on the end of the wire, and clean inside the end of the tube with a needle.

Click Here for Printable Instructions


There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Write Review