SMB-1 Surface mount block for fixed or swiveling applications
Blocks are supplied with two 2mm stainless steel washers, two plastic 2mm flange
washers, a plastic 3mm washer and a M2 x 12mm stainless steel bolt and nut. These
accessories provide for various fixed or swivelling applications. A typical mainsheet
bulkhead applicaon is shown below. The mounting accessories can be replaced by
an M3 mounting screw if desired. Spread the arms of the bracket slightly to fit the
M3 screw. The surface around this block may need reinforcement if it is used in the
right angle configuraon.
Typical use of swivel block - shown here fitted to IOM bulkhead.