CF1 NEW Tapered Craig Smith Fin/Keel Made from Ultra High Modulus Carbon Fibre - Lighter (only 108grams) and extremely stiff, with a 15mm taper, and with a very fine and strong trailing edge. - This keel is the best we have ever seen for an IOM
Tapering profile and thickness on head of keel for ease of producing custom keel case or fitting to existing keel case
High gloss mirror finish, ready to use, no finishing required.
450 mm Long overall (350mm from bottom of hull - 100mm Head)
90 mm Wide at top tapering to 75mm at bottom.
5.2 mm Thick (average) - Thicknes/Chord Ratio 6 %
Finished in White 2 Pack Epoxy
Weighs only 88 grams (40grams lighter than Craigs previous keels)
