The Standard ARS808 Brushless Digital Sail Winch features.
- Suitable for IOM and smaller boats etc, 4 turns -
This is the higher speed and lower power version of the ARS-808
-direct fit replacement for rmg equiped boats, same mount holes and rmg drum can be used.
-brushless motor
-water resistant design IP68 waterproof rating
-metal gears and casing
-high speed
-dual ball bearing races
-wide voltage application
-4 turns programable with transmitter end points
The Specs. 808R- high speed version
Voltage 4.8V - No Load Current 0.85A , Max Load Current 2.50A , Speed 1.95turns/sec, kg/cm 8.5
Voltage 6.0V - No Load Current 0.85A , Max Load Current 2.50A , Speed 2.50turns/sec, kg/cm 11
Voltage 7.4V - No Load Current 0.85A , Max Load Current 2.50A , Speed 3.00turns/sec, kg/cm 13
Voltage 8.4V - No Load Current 0.85A , Max Load Current 2.50A , Speed 3.40turns/sec, kg/cm 16
Note that you will need a rudder servo and receiver able to handle more than 6v to utilise larger battery packs.
Typical rudder servos are only rated to 6v and although futaba receivers are rated to 7.6v , some older or cheaper radio gear are not.
Whilst winches and other products are rated to ip68 waer proof rating this does not mean they are totally weather proof, clean and dry boats and special care in salt water where dry salt crystals can expand and breach sealing.
It is also not recommended to use Lipo batteries or drum barrels over the standard 40mm unit supplied.
Dimensions
Height - body, 45mm
Height - overall, 54.7mm
Length - body dia 52mm
Length- mount holes centre to centre 32mm
