21J - Jumper Strut / Diamond Stay
A single item that is a pair of jumper struts, cut from stainless steel, 70 mm maximum length and can be cut to 40, 50 or 60 mm. 5 grams. Fix to the mast using 2 x M2 screws or No 2 self tapping screws or bond on with carbon tow and resin/cyano. Fits any diameter mast.
Suitable for 10 mm diameter and larger mast tubes. This stainless steel fitting is attached to the mast using two self tapping screws or by wrapping with carbon tow or Dyneema line. The strut length is 70 mm but there are holes at 10 mm intervals allowing the length to be shortened as required down to 40 mm.
