• Model: AP01
  • Shipping Weight: 35grams
  • Manufactured by: AA-Parts

AP01 - Gooseneck/Vang Ball Raced, Carbon Body, Variable Geometry


Sold Out

Product Description




"NEW - Gooseneck/Vang - Carbon Fibre, Ball Raced, with variable geometry to achieve optimum mainsail leech settings for upwind and downwind. (see more info below) - Use on new rigs or retrofit to existing rigs for improved performance;

Fits 11mm and 11.1mm Masts

Height - 50mm - 4mm Vang Thread


Highest quality at an affordable price

Made from prepreg Carbon Fibre Exply Hexcel ® - Cured at 120 ° C

Stainless Steel precision bearings

Can be used as a standard gooseneck by putting the screw to zero offset control

Compatible with forward end main boom fittings of most popular manufacturers.

Comes with flanges for inside the mast, to screw the supplied A2 stainless steel fixing screws into

With a standard gooseneck, when the sail goes from a beat to run the mainsail leach slackens off thus spilling wind as the breeze increases. In the past people have put shims at the bottom of the gooseneck (see some of Lester Gilberts articles).

As the breeze increases you unwind the screw to allow the shaft to be slacker. You then set the boat up for a beating trim with the ability of the gooseneck to tighten or open the leach on the run. - the screw gives the ability to fine tune.

Please Note - To fit SAILSetc main booms you will need item 103a or 103b and for 10mm I.D. round booms you will need item 103-120.   If you require a cunningham eye, order item 35-020 eyebolt and trim thread to 10mm

Please Note - The vang is supplied standard with 10mm locking wheel. If space is tight on sloping decks etc, then we can supply it with a knurled locking tube instead, please advise when checking out.



Click Here for Downloadable Drawing (Exploded View)

For Printable Instructions Click on Page Numbers   Page 1    Page 2    Page 3



There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Write Review